Forums:
Hello, I have been having issues with getting OPEN nat on multiple PS4s on one LAN. I have been using R6250 with Kong for a while now and have yet to find a configuration in port forwarding, port range, triggering, UPnP that will give all 3 ps4 OPEN NAT. I basically settled on cable modem> GS105 switch>(3) R6250 each with it's own WAN IP address. Only 1 Router is cfg'd for DHCP, all wired clients are static, all wifi is DHCP. All DDWRT, R6250 have wifi Disabled. This was the only way I could get OPEN NAT on all 3 at the same time.
Today I picked up a sweet deal on a AC1900 Nighthawk and out of box, with stock R7000-V1.0.4.30_1.1.67. Low and behold the stock firmware can actually give me OPEN NAT on all 3 ps4s at once. So what's the deal with DD-WRT? The only features that interest me are DDNS support, QoS bandwidth/MAC, OPEN NAT.
I can't get all 3 in one router? I'm open to reasonable suggestions that are not basic. I have done every combo and rebooted several hundred times and the only way DDWRT is allowing this is with 3 seperate routers. I've 30/30/30 so many times I can't even count. Every possible scenario Ive thought of, read on the web, everything.
Very frustrated and disappointed to say the least.