Can anyone comment if there are problems with the current Netgear firmware preventing a DD-WRT flash? I know this was an issue with the latest R7000 NG firmware. Currently have V1.3.1.64_10.1.36 on the R7000P and looking to put a recent kong build - any reasons I can’t dive in?
Fed up with NetGear's stock FW stumbles (60, 64, 88). Please advise as to what open source FW would be the best.
Many thanks!
Aqualung
So i thought i did my research. But obvoiously not good enough.
Was looking to buy a router i would flash with DD-WRT.
I bought Netgear Nighthawk R7000P AC2400.
Ive come to find out it will ONLY allow .img files to be uploaded.
Ive searched and searched and dont see many others reporting this issue, and no solution.
Im about to send the router back, anyone know if theres anything i can do?
Hello,
I was running the latest Advanced Tomato Shibby Mod on my R7000 but decided to flash back to Netgears. I followed his instructions here.
https://www.youtube.com/watch?v=rNIpBJPRogY
I got as far as flashing it with the r7000-back-to-ofw.trx file. Upon reboot lights all flash looking good, I get 3-4 pings from 192.168.1.1, but then they die. The power and ethernet port lights are the only ones lit. This same behavior is repeatable by power cycles the router. I've tried the 30/30/30 process multiple times, sometimes a lot longer. Not sure where to go from here.
Any suggestions would be greatly appreciated.
Thanks, Jeff
Hi Guys,
I have a pretty good ISP with 500Mbps download speed. However i have noticed that the latest stable KONg built for the R7000 gives me at most half WAN speeds. Anybody else has the issue? For now I have gone back to the stable fall 2018 release which seems to work great. Is there anyway to get the feedback to teh developer of Kong?
hey guys got a couple r7000's that i want to use to expand a network as access points, wondering what firmware is the most stable/reliable in access point mode for r7000s?
would it be regular netgear, kong/tomato? xvortex asus wrt merlin? + any other?
or is it all personal preference
Hello,
I have the R7000 and am currently using Kongs 9/23/18 build (v3.0-r37015M kongac). I see he had dropped some summer build, but some people were complaining about it, so I am hesitant. What can I use instead of Kong? Brain Slayer is taking over Kong Builds? Should I reset my router and try a different open source solution? Should I get a new router, and use a different open source build?
TIA
Hi,
I flashed AdvancedTomato firmware (v3.5-140 AIO-64K) on my R7000 router recently. The internet works fine but whenever I try to reboot my router either by turning off the router and turning it on or when trying to reboot from the UI, the SSID resets back to Tomato24 and Tomato5. Also the network password, the admin password, the time everything is being reset.
I tried automatic reboot once in week using the scheduler and even with that everything resets to default values. Any idea on how to keep my SSID, passwords, time everything the same after a normal reboot? I tired a thorough nvram erase and that did not fix anything
Hi there,
I'm brand new at this 3rd party firmware thing, but I needed to try something as my router is sitting aside not being used because it's imcompatible with my ISP's modem/router.
One thing lead to another, and I now have OpenWRT 19.07.1 installed, and could figure most of if out, except for WIFI, which as it turns out isn't really supported on the R7000; so much so, there isn't even a WIFI settings page.
So I'm wanting to change to another option; I'm not too concerned if it's DD or Tomato, as long as I have WIFI settings, and the abilty to assign a VLAN number to the WAN port.
What would be the easist way to change to one of these?
Thanks!
NightHawk R7000P(AC2300)
OEM Stock standard router brand new out of the box.
OEM R7000P factory installed firmware version : V1.3.1.64_10.1.36
Can any one assist with step-by-step instructions to flash this new router to
DD-WRT to allow NORDVPN (OpenVPN) firmware to work on this hardware.
----------------------- Step by Step -------------------
Step 1. I login to the router |admin|setup and clear the router back to factory settings.
Step 2. Do I down grade the current OEM version of firmware to a lower version ?
Example : R7000P-V1.0.0.44_1.0.27.zip
Step 3. Do I need to pre-flash with a boot loader version of Kong firmware.
Example: factory-to-dd-wrt-chk
netgear-r7000p-webflash.bin
Step 4. Do I flash with DD-WRT Kong firmware after step 3 preflash?
Example dd-wrt.K3_R7000p.chk
Step 5. Do I reset the router after the new DD-WRT firmware versions is installed?
Step 6. Configure the new DD-WRT firmware settings to OPENVPN
-----------------------------------------------------------------
Thanks
1st why is there updated weekly? are these common hotfixes implimenting new feature, or what?
2nd what is the most stable for the r7000?
Thanks!
Netgear released three security advisories asking everyone to update. I was trying to find information about whether DD-WRT is vulnerable or not. Is there a way to know the version of netgear firmware that my dd-wrt firmware is based on ( if that's a thing )?
Otherwise, how can I know if my version is not vulnerable?
https://kb.netgear.com/000061760/Security-Advisory-for-Post-Authenticati...
Thanks!
Hi,
Is it possible to flash NETGEAR r7000 v2 router with DD-WRT or other open source app ?
I read thatn newer netgear firmware actively blocking DD-WRT ? is it question of firmware or hardware ?
Can I try downsize version firmware ?
I'm trying to install advanced tomato from here https://advancedtomato.com/downloads/router/r7000 onto my brand new r7000(ac-1900). I had to go through some minor initial setup with genie to allow me to get to the router update page. The genie version is V1.0.9.64_10.2.64 I tried to install the initial firmware
tomato-R7000-1.28.AT-ARM-3.5-140-initial-64K.chk
but I get an error saying the firmware is not compatible with the router (error -2).
Is there a tomato install that's compatible with this genie?
I think my router is in a boot loop. Is that really what's going on? Any way I can solve this? I love this router!
It's a Netgear AC1900 Smart WiFi Router (R7000):
https://i.imgur.com/onp3JYh.jpg
I can't be 100% sure of what version is installed, unfortunately.
But it's not an old one, that's for sure, I flashed a firmware earlier this year for MultiWAN (that I actually ended up not taking advantage), so it's fair to assume it's the latest K26ARM: tomato-R7000-ARM--140-AIO-64K.
The last thing I did before this happen was change the DNS, and one thing I did was setting both DNS1 and DNS2 to the same IP, inside my network, to set up a LAN cache. I know I didn't have to use the same IP in both, I just did it anyways :(
So that's pretty much when this started happening, I set the DNSs, saved and rebooted the router just to be sure.
Now here what's happening:
With some cables connect to it:
https://youtu.be/ZDOJLnX9K3c
With no cables connect to it:
https://youtu.be/SokjotEVpcQ
Hello all,
I wired my house to have most of my equipment wired and have an old R7000 in a box that I would like to used to firstly replace my netgear switch in the atic but also to use it as a wifi extender for the first floor and and I am wondering what is the best firmware to use on it and what mode to use to set it up?
My current set up is as follow:
TP-LINK-W9970=>
Router port 4 => Netgear GS308 (8 ports) => Living Room (TV/Kodi Box/Xbox One/BT Vision box/NAS)
Router port 3 => CAT6 cable => Netgear GS605 V4 (5 ports) located in the attic =>
=> Office (2 ports) 1x Desktop PC & 1x Laptop occasionally.
=> Master Bedrooms 1x Smart TV
So the R7000 will replace the Netgear GS605 located in the attic as a switch for the wired connection but I also want it to extend/boost the wifi on the first floor.
I hope that make sense?
Hi everyone. I think I have bricked my r7000 after trying to upgrade to the latest dd-wrt. There's no internet/wi-fi. I can't figure it out. I think it's best I return to Netgear firmware. Has anyone done that? Does anyone know the steps I need to take to restore my router, please.
Thank you, I appreciate any help.
I had FreshTomato "2020.1 K26ARM USB AIO-64K" installed and working well on my Netgear R7000 AC1900 until I updated my computer's OS from Linux Mint to 20.3 which in turn updated samba to 4.13.17 which no longer supports SMB1, so cifs would no longer mount from the router.
I tried flashing "freshtomato-R7000-ARM_NG-2022.1-AIO-64K.trx", but received a "Bad trx header".
I then tried flashing "R7000-back-to-ofw.trx" and it said it was successful.
But now the router will not boot. (Solid amber light. Never blinks.)
I've removed the cover and connected a serial/USB adapter and ran "minicomp -s" to see what was going on. Here is the output from the attempted boot:
------------------------------------------------------
$ minicom -s
Welcome to minicom 2.7.1
OPTIONS: I18n
Compiled on Dec 23 2019, 02:06:26.
Port /dev/ttyUSB0, 22:14:26
Press CTRL-A Z for help on special keys
Digital core power voltage set to 1.0V
Decompressing...done
Digital core power voltage set to 1.0V
SHMOO VER 1.13
PKID07DC06011801080000000000001A103F01000000
S300001D3
00001330
RDLYW0 00000004
RDENW0 00000032
RDQSW0
0000000000111111111122222222223333333333444444444455555555556666
0123456789012345678901234567890123456789012345678901234567890123
00 ----++++++++++++++++++++++++++X++++++++++++++++++++++++++-------
01 --------++++++++++++++++++++++++++X++++++++++++++++++++++++++---
02 ------+++++++++++++++++++++++++X++++++++++++++++++++++++--------
03 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++---------
04 --+++++++++++++++++++++++++X+++++++++++++++++++++++++-----------
05 ----++++++++++++++++++++++++++X+++++++++++++++++++++++++--------
06 -+++++++++++++++++++++++++X++++++++++++++++++++++++-------------
07 --------++++++++++++++++++++++++++X++++++++++++++++++++++++++---
08 -------++++++++++++++++++++++++X+++++++++++++++++++++++---------
09 -------------+++++++++++++++++++++++++X++++++++++++++++++++++++-
10 ---------++++++++++++++++++++++++X++++++++++++++++++++++++------
11 ----------------++++++++++++++++++++++X++++++++++++++++++++++---
12 -------+++++++++++++++++++++++++X+++++++++++++++++++++++++------
13 --------------+++++++++++++++++++++++++X++++++++++++++++++++++--
14 --------+++++++++++++++++++++++++X+++++++++++++++++++++++++-----
15 --------------+++++++++++++++++++++++++X++++++++++++++++++++++++
PW0
0000000000111111111122222222223333333333444444444455555555556666
0123456789012345678901234567890123456789012345678901234567890123
00 -----++++++++++++++++++++++++++X+++++++++++++++++++++++++-------
01 --------++++++++++++++++++++++++++X++++++++++++++++++++++++++---
02 ------+++++++++++++++++++++++++X++++++++++++++++++++++++--------
03 -----+++++++++++++++++++++++++X++++++++++++++++++++++++---------
04 --+++++++++++++++++++++++++X++++++++++++++++++++++++------------
05 -----+++++++++++++++++++++++++X+++++++++++++++++++++++++--------
06 -+++++++++++++++++++++++++X++++++++++++++++++++++++-------------
07 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++--
08 -------++++++++++++++++++++++++X+++++++++++++++++++++++---------
09 ------------++++++++++++++++++++++++++X++++++++++++++++++++++++-
10 ---------++++++++++++++++++++++++X++++++++++++++++++++++++------
11 ----------------++++++++++++++++++++++++X++++++++++++++++++++++-
12 -------++++++++++++++++++++++++++X+++++++++++++++++++++++++-----
13 -------------+++++++++++++++++++++++++X+++++++++++++++++++++++--
14 --------++++++++++++++++++++++++++X+++++++++++++++++++++++++----
15 --------------+++++++++++++++++++++++++X++++++++++++++++++++++++
NW0
0000000000111111111122222222223333333333444444444455555555556666
0123456789012345678901234567890123456789012345678901234567890123
00 ----+++++++++++++++++++++++++++X+++++++++++++++++++++++++++-----
01 --------++++++++++++++++++++++++++++X++++++++++++++++++++++++++-
02 ------++++++++++++++++++++++++++X+++++++++++++++++++++++++------
03 ----++++++++++++++++++++++++++X+++++++++++++++++++++++++--------
04 --++++++++++++++++++++++++++X++++++++++++++++++++++++++---------
05 ---++++++++++++++++++++++++++++X+++++++++++++++++++++++++++-----
06 -+++++++++++++++++++++++++X+++++++++++++++++++++++++------------
07 -------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++-
08 ---++++++++++++++++++++++++++X++++++++++++++++++++++++++--------
09 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++
10 -------++++++++++++++++++++++++++X+++++++++++++++++++++++++-----
11 -------------++++++++++++++++++++++++X+++++++++++++++++++++++---
12 -----++++++++++++++++++++++++++X++++++++++++++++++++++++++------
13 ---------+++++++++++++++++++++++++++X+++++++++++++++++++++++++--
14 -----+++++++++++++++++++++++++++X++++++++++++++++++++++++++-----
15 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++
WRDQW0
0000000000111111111122222222223333333333444444444455555555556666
0123456789012345678901234567890123456789012345678901234567890123
00 ++++++++++++++++++++++++X+++++++++++++++++++++++------+++++++++-
01 +++++++++++++++++++++++++X++++++++++++++++++++++++-------++++++-
02 ++++++++++++++++++++++++X+++++++++++++++++++++++-------++++++++-
03 +++++++++++++++++++++++++X++++++++++++++++++++++++-----++++++++-
04 ++++++++++++++++++++++X++++++++++++++++++++++----------++++++++-
05 ++++++++++++++++++++++++X++++++++++++++++++++++++-----+++++++++-
06 +++++++++++++++++++++++X++++++++++++++++++++++----------+++++++-
07 +++++++++++++++++++++++++X++++++++++++++++++++++++------+++++++-
08 +++++++++++++++++++++++X+++++++++++++++++++++++--------++++++++-
09 -++++++++++++++++++++++++X++++++++++++++++++++++++----------+++-
10 +++++++++++++++++++++++++X++++++++++++++++++++++++------+++++++-
11 ---++++++++++++++++++++++++X+++++++++++++++++++++++-----------+-
12 ++++++++++++++++++++++++X++++++++++++++++++++++++------++++++++-
13 --++++++++++++++++++++++++X++++++++++++++++++++++++----------++-
14 +++++++++++++++++++++++++X++++++++++++++++++++++++-------++++++-
15 -++++++++++++++++++++++++X+++++++++++++++++++++++----------++++-
WRDMW0 00000024
WRDMW0 00000025
ADDR
0000000000111111111122222222223333333333444444444455555555556666
0123456789012345678901234567890123456789012345678901234567890123
00 +++++++++++++++++++S+++++++++++X++++++++++++++++++++++++++++++++
Decompressing...done
CFE for Foxconn Router R7000 version: v1.0.27
Build Date: Thu Jun 28 11:42:11 CST 2018
Init Arena
Init Devs.
Boot up from NAND flash...
Bootcode Boot partition size = 524288(0x80000)
DDR Clock: 800 MHz
Info: DDR frequency set from clkfreq=1000,*800*
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.15.1 (r407936)
et1: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.15.1 (r407936)
CPU type 0x0: 1000MHz
Tot mem: 262144 KBytes
Device eth0: hwaddr 14-59-C0-A6-8F-67, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Checking crc...Loader:raw Filesys:raw Dev:nflash0.os File: Options:(null)
Loading: ..... 4778464 bytes read
Entry at 0x00008000
Closing network.
Starting program at 0x00008000
console [ttyS0] enabled, bootconsole disabled
serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550
brd: module loaded
loop: module loaded
pflash: found no supported devices
bcmsflash: found no supported devices
No NAND flash type found
nflash: found no supported devices
PPP generic driver version 2.4.2
NET: Registered protocol family 24
PPPoL2TP kernel driver, V0.17
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio0
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio1
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio2
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio3
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio4
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio5
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio6
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio7
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio8
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio9
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio10
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio11
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio12
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio13
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio14
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio15
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio16
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio17
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio18
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio19
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio20
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio21
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio22
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio23
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio24
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio25
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio26
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio27
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio28
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio29
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio30
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio31
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio0
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio1
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio2
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio3
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio4
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio5
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio6
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio7
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio8
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio9
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio10
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio11
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio12
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio13
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio14
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio15
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio16
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio17
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio18
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio19
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio20
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio21
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio22
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio23
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio24
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio25
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio26
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio27
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio28
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio29
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio30
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio31
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.1: irq 111, io mem 0x18021000
ehci_hcd 0000:00:0b.1: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0b.0: irq 111, io mem 0x18022000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio0
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio1
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio2
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio3
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio4
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio5
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio6
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio7
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio8
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio9
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio10
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio11
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio12
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio13
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio14
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio15
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio16
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio17
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio18
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio19
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio20
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio21
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio22
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio23
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio24
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio25
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio26
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio27
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio28
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio29
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio30
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio31
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio0
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio1
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio2
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio3
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio4
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio5
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio6
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio7
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio8
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio9
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio10
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio11
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio12
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio13
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio14
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio15
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio16
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio17
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio18
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio19
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio20
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio21
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio22
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio23
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio24
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio25
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio26
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio27
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio28
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio29
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio30
No NAND flash type found
early_nvram_get: Failed reading nvram var gpio31
xhci_hcd 0000:00:0c.0: xHCI Host Controller
xhci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:0c.0: irq 112, io mem 0x18023000
xhci_hcd 0000:00:0c.0: Failed to enable MSI-X
xhci_hcd 0000:00:0c.0: failed to allocate MSI entry
usb usb3: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
u32 classifier
Actions configured
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
ip6tnl0: Disabled Privacy Extensions
NET: Registered protocol family 17
No NAND flash type found
early_nvram_get: Failed reading nvram var qos_enable
No NAND flash type found
early_nvram_get: Failed reading nvram var wla_repeater
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
No NAND flash type found
brcmnand: found no supported devices
VFS: Cannot open root device "mtdblock3" or unknown-block(0,0)
Please append a correct "root=" boot option; here are the available partitions:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[<c00451f8>] (unwind_backtrace+0x0/0xe4) from [<c0359dac>] (panic+0x68/0x188)
[<c0359dac>] (panic+0x68/0x188) from [<c0009214>] (mount_block_root+0x238/0x288)
[<c0009214>] (mount_block_root+0x238/0x288) from [<c0009510>] (prepare_namespace+0x160/0x1c0)
[<c0009510>] (prepare_namespace+0x160/0x1c0) from [<c0008e88>] (kernel_init+0x1c8/0x218)
[<c0008e88>] (kernel_init+0x1c8/0x218) from [<c003fb58>] (kernel_thread_exit+0x0/0x8)
CPU0: stopping
[<c00451f8>] (unwind_backtrace+0x0/0xe4) from [<c003e2f0>] (do_IPI+0xfc/0x180)
[<c003e2f0>] (do_IPI+0xfc/0x180) from [<c0430f88>] (__irq_svc+0x48/0xe8)
Exception stack(0xc046ff78 to 0xc046ffc0)
ff60: c047e764 00000000
ff80: c046ffc0 00000000 c046e000 c047abc8 c04970a8 c047abc0 00025ba0 413fc090
ffa0: 0000001f 00000000 c04cacb8 c046ffc0 c003fbb0 c003fbb4 60000013 ffffffff
[<c0430f88>] (__irq_svc+0x48/0xe8) from [<c003fbb4>] (default_idle+0x24/0x28)
[<c003fbb4>] (default_idle+0x24/0x28) from [<c003fd1c>] (cpu_idle+0x40/0x94)
[<c003fd1c>] (cpu_idle+0x40/0x94) from [<c0008c64>] (start_kernel+0x320/0x37c)
[<c0008c64>] (start_kernel+0x320/0x37c) from [<00008084>] (0x8084)
----------------------------------------------------
<Ctrl-C> does nothing and I can't get to a CFE prompt to even attempt flashing through tftp.
Any ideas on how to proceed? Or is this router a complete brick?
Thanks